Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Edmond Homeowners
A chimney inspection in Edmond answers one question: is your fireplace safe to light this winter, or is something inside the flue working against you? We inspect the full system, from the firebox to the cap, and we tell you plainly what we find and what it means. Our technicians have up to 14 years of experience, and we’re licensed and insured. If you schedule a sweep with us and we spot a cracked liner or a damaged crown during the inspection, we carry the repair through in the same relationship – sweep, inspect, fix, done. When a call comes in early, we can often reach Edmond homes the same day, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 834-5906 for a free estimate.
Fireplace Inspection
Fireplace Inspection is a close look at the parts of the system a fire actually touches – the firebox, damper, smoke chamber, and the first stretch of flue above the fire – and it’s what we recommend before the first burn of the season. If you’ve noticed a smoky start-up, a stubborn damper, or creosote building up faster than it should, an inspection tells you whether it’s a maintenance issue or something structural. We scope the whole assembly rather than eyeballing the opening, and we work on the whole system, not just the part you can see. A typical fireplace inspection in Edmond runs $100-$250 depending on what we have to open up and whether a camera comes into play; the written estimate sets the final price.
What We Check Inside the Firebox
We look for cracked or spalled firebrick, eroded mortar joints, and gaps where heat can reach the masonry behind the firebox. Rusted or warped dampers get flagged too, since a damper that won’t seal lets warm air and creosote odor straight into the room. Each of these is a repair we can handle, not something you’ll have to farm out.
Smoke Chamber and Damper Operation
The smoke chamber is the sloped space above the damper, and rough or poorly shaped walls there cause smoky start-ups and slow drafts. We check the damper opens and closes cleanly and examine the shelf where creosote tends to collect. If the chamber needs smoothing or resurfacing, we use HeatShield rather than tearing into the masonry.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole vertical assembly – the flue, the masonry or prefab shell, the crown, and the cap – and they’re what you want whenever the condition of the chimney is in question, not just the firebox. That includes a new home purchase, a change in how you burn, a gas insert going in, or a draft that’s gotten worse over a season. Edmond Chimney Sweep aligns its inspections with NFPA 211 categories, so you get documentation you can hand to an insurer or a buyer without explaining what it means. We work with professional-grade brands like Olympia Chimney and Copperfield because the parts we recommend should last. Pricing for a standard inspection in Edmond typically lands in the $100-$300 range depending on access and scope; the written estimate sets the final price.
What a Standard Inspection Covers
We check the accessible portions of the flue, the condition of the cap and crown, and the exterior masonry for movement or missing mortar. We also confirm the appliance is venting the way it’s supposed to, which catches problems that a cleaning alone won’t. Anything we find gets pointed out to you with a photo or a look down the flue, not just a line on a form.

When to Schedule One
Annually is the baseline, before the first fire of the season. Add an inspection after a chimney fire, after storm damage, or before you sell a house. If the last inspection on your property was a few years back, that alone is reason enough to schedule one.

Chimney Flue Inspection
Chimney Flue Inspection focuses specifically on the liner and the passage the smoke travels, which is where most serious problems hide. The flue is the part you can’t see from the hearth, and a cracked clay tile, a gap in a liner joint, or heavy glaze creosote there is the difference between a safe fireplace and a real risk. That’s why a camera inspection is standard for us when the flue looks suspect. If we find a liner that’s failing, we reline with DuraFlex flexible liner systems rather than patching around the problem. A flue-focused inspection in Edmond generally runs $150-$350 when a camera is involved; the written estimate sets the final price.
Liner Condition and Integrity
Clay tile liners crack from heat cycling, and a joint that’s separated or a tile that’s spalled leaves an opening for heat and gases to reach the structure. We run a camera the length of the flue and note every break, offset, or restriction. If the liner is finished, we quote a reline with DuraFlex and walk you through it.
Creosote and Obstruction Checks
We grade creosote as we go – light soot up top, glaze at the bottom where it hardens. We also check for bird nests, leaves, and anything else that’s blown in and narrowed the flue. A restriction here is one of the most common causes of a smoky, underperforming fireplace.
Chimney Fire
Chimney Fire damage is often invisible from the room, which is exactly why it needs a professional inspection afterward – the fire itself may have gone out, but the liner and masonry can be left cracked or weakened. You don’t have to have seen flames; a roaring sound, a shower of sparks from the top, or a strong burning smell can all indicate a chimney fire that burned hot and short. We inspect the whole system after any suspected fire, before you burn again. If repairs are needed, they’re done with professional-grade materials, not improvised fixes. Inspection following a suspected chimney fire in Edmond typically runs $150-$350 depending on access and camera work; the written estimate sets the final price.
Hidden Damage After a Fire
Heat from a chimney fire can crack clay tile liners and damage mortar joints without any visible sign from the hearth. That’s why a camera inspection matters after one – the damage lives where you can’t see. We document what we find so you know exactly what needs attention.
When to Stop Burning
If you’ve had a chimney fire, don’t light another until we’ve inspected. A compromised liner lets heat and carbon monoxide reach the structure, and that’s a risk we won’t leave you guessing about. A short delay to inspect is far less costly than a repair after a second fire.
Level 2 Chimney Inspection
A Level 2 Chimney Inspection is a more thorough assessment than the annual visual check – it includes a camera scan of the flue interior, inspection of accessible areas of the attic and crawlspace, and a look at the chimney’s exterior from top to bottom. You need one when a property changes hands, after a chimney fire, when a flue liner is being added or replaced, or when you switch fuel types or install a new appliance. We align our Level 2 work with NFPA 211, and it produces documentation you can share with an insurer or a buyer. A Level 2 in Edmond generally falls in the $200-$450 range depending on access and how much of the system needs opening up; the written estimate sets the final price.
What’s Included Beyond a Visual Check
We run a camera through the flue, check clearances to combustibles, and inspect the areas around the chimney in the attic and crawlspace where heat transfer shows up first. We also check the exterior for cracks, loose mortar, and crown damage. It’s a full-system look rather than a single-point check.
Real Estate and Insurance Needs
Buyers, sellers, and insurers often ask for a documented Level 2 report. We produce one with photos and clear notes so everyone can see the same condition. That saves back-and-forth during a closing or a claim.
Chimney Leak
A Chimney Leak usually shows up as water stains on the ceiling near the chimney, a musty smell in the room, or rust on the firebox – and it almost always traces back to the crown, flashing, or cap rather than the flue itself. Edmond rain and the freeze-thaw swings of a central Oklahoma winter are hard on masonry, so water intrusion is common here. We find the source instead of guessing, then repair with weather-rated parts from brands like Gelco and Famco. A leak diagnosis and repair in Edmond commonly runs $200-$600 depending on the source and the repair needed; the written estimate sets the final price.
Tracing the Source
We check the crown for cracks, the flashing where the chimney meets the roof, and the cap for gaps or damage. Water can travel a long way before it shows up inside, so we follow it rather than patching the first spot we find. That’s how you stop a leak from coming back.
Repairs That Hold Up to Weather
A cracked crown gets resurfaced or rebuilt, failed flashing gets reset and sealed, and a damaged cap is replaced with a Gelco or Famco cover built for the weather. Hardware-store caulk and generic caps don’t survive an Oklahoma freeze-thaw cycle. We use products that are made for the job.
Chimney Camera Inspection
Chimney Camera Inspection uses a specialized camera run through the flue to see the parts of the interior you otherwise can’t – cracks, gaps, offsets, and blockages that a visual look from the hearth will miss. We recommend it whenever a liner is suspect, after a fire, during a home purchase, or any time drafts or smoke have become a problem. The camera lets us show you what we’re seeing and document it with photos, so nothing is recommended without evidence you can see for yourself. A camera inspection in Edmond typically costs $150-$350 depending on the flue’s length and complexity; the written estimate sets the final price.
What the Camera Reveals
Cracked tile joints, separated liner sections, glaze creosote, and bird nests all show up clearly on camera. So do the things you’d never find from below – a partially collapsed tile, an offset joint, or a restriction that’s choking the draft. We point out each finding and explain what it means.
Real Evidence for Your Decisions
Our job is to show you the problem, not sell you a repair you can’t verify. The camera footage and photos become the basis for any recommendation, so you can decide with confidence. That’s what separates an inspection from a sales call.
Brands We Service
We work with DuraFlex flexible liner systems and know where the joints and seams are most likely to need attention after years of heat cycling – that’s the part of a liner you never see from the top of the chimney. We also work with Olympia Chimney products, and we’re familiar with how their components fit and wear in real installations. Our repair side uses HeatShield for resurfacing, which lets us restore a deteriorating flue liner without demolition where the condition allows it.
On the exterior, we use Gelco caps and covers and Famco venting products because they’re built to stand up to weather rather than being a temporary patch. We service these brands and know the failure points specific to each. Whether you have Olympia Chimney, DuraFlex, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fireplace that used to draw well and now smokes on start-up usually has a restriction or a damaged smoke chamber. It’s worth checking before you burn again, because repeated smoke in the room is a sign the flue isn’t doing its job.
- Water stains or a musty smell near the chimney. Stains on the ceiling or the wall near the chimney point to a leak that will only get worse with the next rain. The sooner we trace it, the less masonry it usually takes to fix.
- A strong creosote smell that won’t go away. Glaze creosote has a sharp smell that gets worse with humidity and can be a fire risk if it’s thick enough. That’s worth a camera look.
- Cracked or missing mortar on the chimney exterior. Loose mortar and spalled brick let water in and can eventually affect the chimney’s stability. It’s cheaper to address before it’s structural.
- You’ve had a chimney fire, even a small one. Any fire in the flue deserves an inspection before the next burn. Damage is often invisible from the room.
Our Process, Step by Step
- 1
Book the visit. Call us and describe the fireplace – wood-burning, gas insert, wood stove – and what you’ve noticed. We’ll set a time and give you the price range up front, with the written estimate setting the final price.
- 2
Sweep first if needed. If the chimney needs cleaning before we can see anything, we sweep it as part of the visit. That’s not a separate sales pitch – it’s how a real inspection gets a clear view.
- 3
Inspect the whole system. We check the firebox, damper, smoke chamber, and flue, and we run a camera through the interior when the situation calls for it. We also examine the exterior, the crown, and the cap.
- 4
Show you what we found. We point out issues with photos and a look down the flue, and we tell you what’s urgent, what can wait, and what’s normal wear. No pressure to decide on the spot.
- 5
Carry the repair through if you want it. Sweep, inspect, fix – one relationship. If a reline or resurfacing is needed, we quote it with DuraFlex or HeatShield, and you can book it when you’re ready.
How Much Does Chimney Inspection Cost in Edmond?
Chimney inspection in Edmond typically costs $100-$450 depending on the level of inspection and what we need to access. A standard visual inspection with a sweep generally runs $100-$250. A camera-based flue inspection runs $150-$350. A Level 2 inspection – the full-system look that includes the attic, crawlspace, and a documented camera report – generally falls in the $200-$450 range. A leak diagnosis adds a little depending on how many areas we have to check. Every one of those figures is an estimate, and the written estimate sets the final price.
What affects the price: whether the chimney is clean, how accessible it is from the roof, whether a camera is needed, and whether the inspection is tied to a real estate transaction. Delaying the visit doesn’t save money – it usually costs more once a small crack becomes a full reline, or a leaky flashing becomes water damage in the attic. There’s no cheap path around a failing liner, but there’s a clear one: get the camera evidence first, then decide.
We don’t hide fees behind the inspection. You get a written estimate up front, a clear scope of what’s included, and a photo report when camera work is done. If work can safely wait, we’ll say so.
Our Service Area Near Edmond
We serve Edmond and the communities around it – homeowners in Edmond, Guthrie, and Harrah, plus Piedmont, Yukon, Forest Park, Luther, Nicoma Park, Langston, and Crescent. Response times depend on the route, and fast dispatch runs from 7am to 7pm, Sunday through Friday. If you’re outside the Edmond area, call and we’ll confirm scheduling. We book a sweep or inspection, and the visit happens when the estimate says it will.
Serving Edmond, OK – Our Local Coverage Area
We serve Edmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Edmond
A chimney inspection is a professional assessment of the entire chimney system – the firebox, damper, smoke chamber, flue, and exterior – to find safety or code issues before they become expensive. It’s more than a cleaning; the sweep clears the flue, and the inspection checks that everything else is sound. We align our inspections with NFPA 211 categories and document what we find. Call (844) 834-5906 for a free estimate.
A standard inspection usually takes 45 minutes to an hour, and a Level 2 with camera work and attic access takes a bit longer. The time depends on how accessible the chimney is and whether a sweep is done first. We usually know within the first ten minutes if the visit is a routine check or something more involved. Call (844) 834-5906 to book a time.
A standard inspection in Edmond typically runs $100-$250, a camera-based flue inspection $150-$350, and a Level 2 inspection $200-$450 depending on access and scope. These are estimates; the written estimate sets the final price. We don’t add surprise fees after the fact. Call (844) 834-5906 for an exact quote – estimates are free.
Yes. We service Olympia Chimney and DuraFlex installations and know where those components wear over years of heat cycling. If a reline is needed, DuraFlex is one of the systems we install, so the repair matches the original design. If your system uses another type of chimney product, we can still inspect it and tell you what we find. Call (844) 834-5906 with questions.
Yes, we can often reach Edmond homes for a same-day inspection when the schedule allows. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 834-5906.
Our inspection work is backed by our professional standards and the materials we use – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield – and any repair quote spells out the coverage in writing. We don’t claim promises we can’t back up. Ask for the written details when we give you the estimate. Call (844) 834-5906 to discuss.
Clear the area around the fireplace, make sure we have access to the attic and crawlspace if a Level 2 is scheduled, and let us know the appliance type (wood fireplace, gas insert, wood stove). Don’t burn for at least 24 hours before the visit so the flue is cool and the creosote is settled. That’s all the prep that’s needed. Call (844) 834-5906 to book.
Schedule Your Chimney Inspection Service in Edmond Today
If you’re ready to know what’s actually going on inside your chimney, call Edmond Chimney Sweep at (844) 834-5906. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. You get a free written estimate, a clear scope, and a photo report with any camera work. One relationship covers sweep, inspection, and repair – we carry it through. Edmond chimney sweep work is what we do, all day, every day of the week we’re open. Call today for your no-obligation estimate.
Written by the team at Edmond Chimney Sweep.